Patchcord-Series - Fiber Optic Patch Cord

Patchcord SC ST LC FC MTRJ MU E2000 Series

型号 : Patchcord-Series
Patchcord SC ST LC FC MTRJ MU E2000 Series
Fiber jumper (also called optical fiber connector) refers to the cable connector plug is installed on both ends, used to achieve the optical path are movably connected; one end is provided with a plug is called pigtail.

optical fiber jumper (Optical Fiber Patch Cord/Cable) and similar to coaxial cable, but no net shielding layer. The center is the core of light transmission glass. In multimode fibers, the diameter of the core is 50 mu m~65 mu m, roughly and human hair thickness is quite.

While the single mode fiber core diameter of 8 mu m~10 mu m. The core is surrounded by a layer of glass envelope refractive index than the core low, in order to make the optical fiber holding in the core. Outside is a thin layer of plastic jacket, used to protect the envelope.

GZ-Link Supplied Patchcord Connectors which performance met with all the requirement of IEC standard.
It is performance met with all the requirement of GR-326-CORE.
Compatible with RoHS.

Type	Single mode / Multi mode
Polishing Type	PC / UPC / APC
Cable diameter	0.9 / 2.0 / 3.0mm /Ribbon Fanout
Insertion loss (IL) [dB]	< 0.2 For SMF / < 0.3 For MMF
Return loss (RL) [dB]	> 50 PC / > 55 UPC / > 65 APC
Ferrule ID(mm)	0.125 For SMF / 0.127 For MMF
Exchangeability	≤ 0.2 dB ( Connect Randomly )
Vibration	≤ 0.2 dB ( 5～50 Hz, 1.5mm Amplitude )
Temp. Range	≤ 0.2 dB ( - 40ºC ～ 80ºC, 21 Cycles )
Body Color	Blue / Green for APC Gray for PC
Boot Color	Red / black / blue or customized available