100G QSFP28 AOC Active Optical Cable
- 型号 : GQS-100AOC-XXX
- 100G QSFP28 AOC Active Optical Cable
-
100G QSFP28 AOC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ AOC for 100 Gigabit Ethernet and Infiniband EDR Applications. This AOC is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 100 Gbps bandwidth. Each lane can operate at 25.78125 Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber.
100G QSFP28 AOC is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module incorporates GZ-Link proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
- 4 channels full-duplex transceiver modules
- Supports 100Gbps total data rate
- Transmission data rate up to 28.05Gbps per channel
- 4 channels 850nm VCSEL array
- 4 channels PIN photo detector array
- Low power consumption <3.5W
- Hot Pluggable QSFP form factor
- Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF
- Single MPO connector receptacle
- Built-in digital diagnostic functions
- Operating case temperature 0°C to +70°C
- 3.3V power supply voltage
- RoHS 6 compliant (lead free)
| Package (Form Factor) | 100G QSFP28 AOC |
| Data Rate (typical) | 25.78 Gbps/CH |
| Distance | 100m on OM4 MMF |
| Transmitter | 4CH VCSEL Array Laser |
| Receiver | 4CH PIN photo detector Array |
| TX Output Power (dBm) | -8.4~+2.4 |
| RX Sensitivity (dBm) | -5.2 |
| Low/High Case Temperature | 0°C~70°C |
| Voltage Supply (typical) | 3.3v |
| Connector | QSFP28 |
- IEEE 802.3bm 100GBASE SR4
- Infiniband EDR
- 128G Fibre Channel
- 4x28Gb/s Multimode OTN
